Push-Lock With Lag Clevis

The Push-Lock® with Lag Clevis is an exposed, swageless, non-tensioning, face-of-the-post-mounted fitting that is suitable for level or pitched runs, and is available for1/8” and 3/16” diameter 1×19 stainless steel cable.

While it works on both pitched and level cable runs, this fitting is particularly suited for pitched runs due to its ability to pivot at the clevis, ensuring a secure fit even at angles.

No special tools are required. The Push-Lock® system makes it easy to attach the cable to the fitting using the locking wedge system, saving both time and effort.

The Push-Lock® with Lag Clevis can be used with any tensioning fitting on the opposite end of the run. This fitting is installed into a pre-drilled hole in the wood end post. Drive the lag thread into the hole until the fitting shoulders on the post face. The cable attaches to the body via our Push-Lock® locking wedge system which requires no special tools.

While this fitting can be used on pitched or level runs, it is most appropriate for pitched runs because the body of the fitting pivots at the clevis. The pre-drilled hole for the lag eye is drilled level, making installation easy.