top of page

INVISIWARE STUD

Post Types:

Metal, Wood

Fitting Types:

Non-Tensioning, Swaging

The Invisiware® Stud is a concealed, swaged, non-tensioning, inside-the-post-mounting fitting that is suitable for use on level or pitched runs and is available for 1/8”, 3/16”, 1/4”, 5/16”, and 3/8” diameter 1×19 stainless steel cable.


The Invisiware® Stud can be used as a non-tensioning end in level or pitched applications. It is swaged onto one end of the cable and threaded into a drilled and tapped hole in the face of the post (1/4” wall thickness minimum). This fitting would typically be paired with an Invisiware® Receiver and Stud tensioning fitting on the opposite end. This method of using an Invisiware® Stud as a  non-tensioning end is restricted to interior applications.

CABLE DIAMETER

PART NO.

THREAD

"L" LENGTH

"D" DIAMETER AFTER SWAGED

1/8"

CH-S-4

5/16-24

1.180"

.250"

3/16"

CH-S-6

5/16-24

1.140"

.250"

1/4"

CH-S-8

7/16-20

1.380"

.375"

5/16"

CH-S-10

9/16-18

1.330"

.500"

3/8"

CH-S-12

9/16-18

1.310"

.500"


bottom of page