top of page

SEARCH RESULTS

Search this site

380 results found with an empty search

  • Wedge Anchor | American Structures

    < Back Wedge Anchor REQUEST A QUOTE A heavy-duty wedge anchor designed for securing posts and railing systems to concrete surfaces. Its stainless steel construction ensures superior durability and rust resistance. LENGTH PART NO. 3/8" X 3 3/8" FS-WA-3/8X3.75-304

  • 3" x 3" Bevel End Cap | American Structures

    < Back 3" x 3" Bevel End Cap REQUEST A QUOTE 3" x 3" Bevel End Cap MATERIAL COLOR LENGTH PART NO. PLASTIC SELECT COLOR 3" PC-3EC

  • Invisiware Receiver With Push-Lock Stud | Cable Railing Hardware

    Explore high-quality cable railing hardware for Invisiware Receiver With Push-Lock Stud. Durable, stylish, and easy-to-install solutions for modern railings. Perfect for any outdoor or indoor project. < Back Invisiware Receiver With Push-Lock Stud Post Types: Wood Fitting Types: Swageless, Tensioning REQUEST A QUOTE The Invisiware® Receiver with Push-Lock® Stud combination is an exposed, swageless, tensioning, through-the-post-mounted fitting that is suitable for level runs only, and is available for 1/8” and 3/16” diameter 1×19 stainless steel cable. The Invisiware® Receiver with Push-Lock® Stud can be used with any fitting on the opposite end of the run. This fitting requires that a minimum of 2-1/2” of clearance exists on the back side of the end post to install the Receiver into the post. We recommend using a stainless steel flat washer between the fitting shoulder and the mating surface of your wood post. The cable attaches to the Push-Lock® Stud fitting via our Push-Lock® locking wedge system which requires no special tools. This fitting was created for applications requiring substantial take-up and a preference for a swageless tensioning fitting. We do not recommend this fitting being installed in pitched applications because it would require drilling all of the holes in the end post at an angle. While this is possible with special fixtures, if it is not done correctly the end result would be visually unacceptable. A = LENGTH OF RECEIVER BODY A = LENGTH OF RECEIVER BODY A = LENGTH OF RECEIVER BODY A = LENGTH OF RECEIVER BODY A = LENGTH OF RECEIVER BODY CABLE DIAMETER USE WITH SWAGELESS STUD NO. 2.30" 2.40" 2.53" 3.03" 3.56" 1/8" CH-PLST-4 CH-R-6-42 CH-R-6-72 CH-R-6-82 CH-R-6-52 CH-R-6-62 3/16" CH-PLST-6 CH-R-6-42 CH-R-6-72 CH-R-6-82 CH-R-6-52 CH-R-6-62

  • 10" x 10" Free Standing Base Plate | American Structures

    < Back 10" x 10" Free Standing Base Plate REQUEST A QUOTE 10”x 10” Freestanding Base Plate MATERIAL COLOR LENGTH PART NO. STEEL BLACK 10" X 10" PC-10SBP-BLK

  • RA-P421FM Cable Post | American Structures

    < Back RA-P421FM Cable Post Compatible Infill: Cable w/o BR100 Compatible Rail Styles: TR100, TR600 REQUEST A QUOTE Fascia Mount Rail Post / Drilled for Cable Corner, Intermediate, and End Post / Drilled 12 holes / actual length 52". LENGTH PART NO. DRILLED HOLES 52" RA-P421FM-CEP RA-P421FM-CIP RA-P421FM-CCP 12 HOLES 3-3/16" O.C. FOR 42" RAIL HEIGHT

  • Inside Corner Fascia Mount Post Cover | American Structures

    < Back Inside Corner Fascia Mount Post Cover Compatible Infill: Cable w/ BR100, Cable w/o BR100, Glass, Horizontal Picket, Mesh Panel, Perforated Panel, Picket Compatible Rail Styles: TR100, TR200, TR400, TR600, TR999 REQUEST A QUOTE A protective cover designed to conceal mounting hardware on inside corner fascia brackets. It enhances aesthetics while shielding components from the elements. DIMENSION PART NO. N/A RA-FMB-IC-CVR

  • 2" x 6" Corbel End Cap | American Structures

    < Back 2" x 6" Corbel End Cap REQUEST A QUOTE 2”x 6” Corbel End Cap MATERIAL COLOR LENGTH PART NO. PLASTIC SELECT COLOR 6" PC-26CEC

  • Invisiware Threaded Tab | Cable Railing Hardware

    Explore high-quality cable railing hardware for Invisiware Threaded Tab. Durable, stylish, and easy-to-install solutions for modern railings. Perfect for any outdoor or indoor project. < Back Invisiware Threaded Tab Post Types: Metal Fitting Types: Swaging, Tensioning REQUEST A QUOTE The Adjust-A-Jaw® can be used with any fitting on the opposite end of the run. This fitting attaches to the end post by installing a Threaded Tab into a pre-drilled and tapped hole in the end post and attaching the threaded jaw portion of the fitting to the threaded tab (see bottom of page) with a button head screw. The cable is retained within the body portion of the fitting by a ferrule swaged onto the end of the cable. The lock nut is installed all the way onto the threaded jaw first, followed by the body, which is secured onto the jaw, creating tension on the cable. Once sufficient tension is achieved, the lock nut is secured against the end of the body to secure the fitting from loosening. While this fitting can be used on pitched or level runs, it is most appropriate for pitched runs because the threaded jaw portion of the fitting pivots at the tab. Use of this fitting requires an appropriately sized ferrule that is swaged onto the cable. Ferrule sold separately. CABLE DIAMETER PART NO. 1/8", 3/16" CH-TT-6B 1/4", 5/16", 3/8" CH-TT-8B

  • Adjust-A-Body Threaded Bolt | Cable Railing Hardware

    Explore high-quality cable railing hardware for Adjust-A-Body Threaded Bolt. Durable, stylish, and easy-to-install solutions for modern railings. Perfect for any outdoor or indoor project. < Back Adjust-A-Body Threaded Bolt Post Types: Metal Fitting Types: Swaging, Tensioning REQUEST A QUOTE The Adjust-A-Body® with Threaded Bolt is an exposed, swaged, tensioning, face-of-the-post-mounted fitting that is recommended for level runs only. This fitting is available for 1/8”, 3/16”, 1/4”, 5/16”, and 3/8” diameter 1×19 stainless steel cable. The Adjust-A-Body® with Threaded Bolt can be used with any fitting on the opposite end of the run. The short thread of the threaded bolt portion of the fitting is secured into a pre-drilled and tapped hole in the end post. The cable is retained within the body portion of the fitting by a ferrule swaged onto the end of the cable. The lock nut is installed all the way onto the threaded bolt first, followed by the body, which is secured onto the threaded bolt, creating tension on the cable. Once sufficient tension is achieved, the lock nut is secured against the end of the body to secure the fitting from loosening. Use of this fitting requires an appropriately sized ferrule that is swaged onto the cable, which must be purchased separately.. CABLE DIAMETER PART NO. USE WITH FERRULE NO. "S" "T" THREAD "Ls" "Lt" "Loq" "Ln" "Lr" "D" 1/8" CH-A-JTB6 CH-F-4 5/16-24 5/16-24 L.H. .375" 2.00" 2.625" .375" 2.75" .490" 3/16" CH-A-JTB6 CH-F-6 5/16-24 5/16-24 L.H. .375" 2.00" 2.625" .375" 2.75" .490" 1/4" CH-A-JTB8 CH-F-8 5/16-24 7/16-20 L.H. .375" 2.50" 3.125" .500" 3.00" .617" 5/16" CH-A-JTB12 CH-F-10 1/2-20 9/16-18 .62" 3.00" 4.00" .62" 4.50" .744" 3/8" CH-A-JTB12 CH-F-12 1/2-20 9/16-18 .62" 3.00" 4.00" .62" 4.50" .744"

  • FAST-LOC™ Tensioning Receiver with Angled Lag | Cable Railing Hardware

    Explore high-quality cable railing hardware for FAST-LOC™ Tensioning Receiver with Angled Lag. Durable, stylish, and easy-to-install solutions for modern railings. Perfect for any outdoor or indoor project. < Back FAST-LOC™ Tensioning Receiver with Angled Lag Post Types: Wood Fitting Types: Tensioning REQUEST A QUOTE The Tensioning Receiver with Angled Lag is an exposed, swageless, tensioning, face-of-the-post mounted fitting for wood posts. It is suitable for use on both level and sloped runs and is available for 1/8” diameter 1x19 stainless steel cable. Can be used with any fitting on the opposite end of the run. PART NO. DESCRIPTION CABLE DIAMETER CH-FL-1-T-ANG-LAG Tensioning Receiver with Angled Lag 1/8"

  • Careers | American Structures & Design

    Our careers page highlights our core values and current manufacturing jobs. Explore opportunities that align with your values and career goals today! JOIN OUR TEAM VIEW OPEN POSTIONS Humble We acknowledge our limitations and are open to learn from others. CORE VALUES Hungry We are willing to work hard, take risks, and constantly strive for improvement. Smart We have good judgment and intuition around the impact of our actions. "I've learned a lot about manufacturing and CNC operations through AS&D." Alex CNC Operator JOB OPENINGS Warehouse and Manufacturing Jobs | Employee 1 - Sumner This position is responsible for receiving, storing, loading, unloading, inventorying, and packaging material for our warehouse and assembly operation. The position also requires the operation of power tools and forklift equipment. Work Hours Morning shift: 6:00 AM – 2:30 PM, Monday – Friday Swing shift: 1:30 PM – 10:00 PM, Monday – Friday Major Duties/Responsibilities APPLY NOW

  • Flat Top TR200 Rail | Aluminum Guardrail Systems

    Explore the sleek Flat Top TR200 series aluminum guardrail system, featuring customizable infill options and colors to match your project! FLAT TOP TR200 REQUEST A QUOTE MOUNTING STYLE Surface Mount Fascia Mount Flush Mount Core Mount Knife Plate INFILL OPTIONS Glass Infill Picket Infill Perforated/Mesh Infill Cable Infill Midrail Design (Works with all infill options) FINISH COLOR Black (Stock) White (Stock) Brown (Stock) Anodized Custom GALLERY ABOUT The Series 200 Aluminum Guardrail features a sleek, flat design that’s perfect for creating a modern and functional railing system. Ideal for level applications, this guardrail works seamlessly in horizontal installations and can also adapt to stairways when paired with a secondary handrail system like the TR100 or TR600. Built for flexibility, the Series 200 allows for easy joining with splices to achieve any required length. Its field-trimmable design ensures simple, precise customization directly on-site. Suitable for both residential and commercial projects, this system offers a combination of clean lines, easy installation, and lasting durability, making it a top choice for contemporary railing needs. RESOURCES Railing Installation Instructions Railing Installation Instructions (Stairs) Railing Overview

bottom of page